Steer For Vector Field + Steer For Formation not working for small Distance

  • November 19, 2016 at 11:54 #16489
    Goldroger
    Participant

    Hi All,

    I have a problem using formation to move units for a small distance less than 1.0f, Units go for formation but does not go for destination.
    Following is start units position without formation:
    Units Start Position
    Following is Units position after click to the destination Marked with blue line:
    Units Position after click
    Units are never reach their destination.
    Kindly see the behavior in the following video: Here
    Helps Please.

    • This topic was modified 11 months ago by Goldroger.
    • This topic was modified 11 months ago by Goldroger.
    • This topic was modified 11 months ago by Goldroger.
    • This topic was modified 11 months ago by Goldroger.
    • This topic was modified 11 months ago by Goldroger.
    • This topic was modified 11 months ago by Goldroger.
    November 19, 2016 at 18:51 #16497
    Goldroger
    Participant

    Hi Guys,

    Sorry for the disturb. I find the issue is about the auto slow calculation units stop fast cause of the small distance’s I’m using. I set the slow distance to 0 and everything worked fine.

    Thanks any way.

    • This reply was modified 11 months ago by Goldroger.
    November 21, 2016 at 10:44 #16527
    Rami
    Keymaster

    Hey Goldroger,

    Thanks for your post. Sorry for the slow response, but I’m happy to hear that you worked out a solution.

    I feel like I should warn you against such small scales however. In our experience, many things can start breaking down when using very small scales in Unity, especally physics. Normally we recommend going for a scale of about 1 unit to 1 meter. For an example, the default gravity setting assumes this ratio.

You must be logged in to reply to this topic.